KnuKonceptz Inline Waterproof ANL Fuse Holder w/ Fuse 1/0 Gauge

Description

Amp Kits
Fuse Blocks
Fuses
HDMI Cables
Power Wire
RCA Cables
Sound Dampeners
Speaker Wire
Terminals
Amp Kits
Fuse Blocks
Power Wire
RCA Cables
Speaker Wire
Terminals
Description
KnuKonceptz 0 Gauge in Line Fuse Holder
The FH-20 is a high current handling inline waterproof fuse holder that accepts one 0, 2, or 4 gauge in/output and is rated to handle up to 300 amps of current. Finished in a satin nickel plating with hardened black anodized steel set screws and translucent acrylic housing makes the FH-20 inline fuse holder not only attractive but durable too!
Price includes your choice of Fuse
Please Note Fuse size in eBay order notes!
80/120/200/250 Amp Available
We will ship 250A if no fuse is noted!
Specifications
Product FAQ
Additional Images
Related Products
Specifications
KnuKonceptz FH-20 Fuse Holder
Dimensions
6.0”L x 2.2”W x 1.7”H
Input Gauge
0 - 4 Gauge
Output Gauge
0 - 4 Gauge
Fuse Type
ANL
Finish
Nickel Silver
Back to top
Product FAQ
Q:
Why do I need an inline fuse holder?
A:
The job of an inline fuse holder is to protect your vehicle in case of an accident. Should the car audio system's main power wire have a short to ground, the fuse will blow and prevent additional damage from occurring.
Q:
How far from the battery should I mount an inline fuse holder?
A:
Typically you want to mount the inline fuse holder as close to the battery as possible. General rule of thumb is 1-2 feet.
Q:
What size fuse should I use with my inline fuse holder?
A:
There are two possible answers, you can select your fuse based on the maximum rated amperage capacity of your power wire OR based on the maximum current draw your audio system is capable of. The later though must also be less then the cables maximum amperage capacity.
Q:
Do I need an inline fuse holder when adding a second battery to my car?
A:
Yes, actually you would need two inline fuse holders in a dual battery installation if Battery A is under the hood and Battery B is in the rear of the vehicle. One inline fuse holder would not be able to protect your vehicle because with a second battery, power is already on both sides of the fuse at all times. An inline fuse holder should be placed near each battery protecting the cable that is passing through the interior of the vehicle in case of an accident.
Back to top
Related Products
KnuKonceptz ANL Fuses
Grab a couple extra fuses, just in case
KnuKonceptz Battery Cable
Connect your knu block with one of our three series of cables
KnuKonceptz Tinned Copper Ring Terminals
Tinned copper rings are a perfect way to terminate your cable. Our heat shrink is glue lined to create a water tight seal.
KnuKonceptz Distribution Blocks
Distribute power to multiple power hungry amplifiers
Back to top
About
Policy
Shipping
FAQ